Our Advantages:
1. More than 30 years experience in designing & manufacturing of rubber machines.
2. Jerry-build & inferior quality are never allowed.
3. Powerful technical team for customized service & professional oversea technical guide.
4. Strong processing capability for the most efficient machine delivery.
XJ-150 Hot feed rubber extruder, tire tread extrusion machine, tire tread extruder, rubber extruder
Machine Usage:
This rubber extruder is used for the extrusion of half-finished rubber products such as tire tread, inner tube, rubber flaps and rubber tube etc.
Machine Introduction:
1. This rubber extruder mainly consists of extrusion system, transmission system, heating and cooling system, electrical control system.
2. The machine body is installed with temperature mearsuring and indicating device. The feeding zone is equipped with side rolls for the enhancement of feeding capability.
3. The screw and bush of the extruder both adopt nitriding steel(38CrMoALA). The surface of the screw and the inner wall of the bush are both gone through nitrogen treatment to get enough strength and wear-resistance.
4. This rubber extruder adopts frequency conversion motor drive. The rotating speed can be easily regulated within the rotating speed range.
5. The whole extruder's features are compact, high in bearing capacity, stable in transmission, low noise, high efficiency.
6. The temperature of main machine and screw can be controlled by passing with steaming or cooling water.
Product Features:
1. Durable machine body with sufficient raw material applied.
2. Reliable machine quality with superior accessories chosen.
3. Latest machine design
4. Less maintenance needed
5. Easy installation
6. Environment protection
7. High safety configuration
8. High automation
9. High efficient and superior mixing performance.
10. Low power consumption & labor saving.
Technical Parameters:
| Model |
XJ-65 |
XJ-115B |
XJ-120 |
XJ-150 |
XJ-200 |
XJ-250 |
| Forms of screw and screw thread |
Double-head equal-depth convergent type |
Double-head convergent type |
Double-head convergent type |
Double-head unequal-depth convergent type |
Double-head convergent type |
Double-head convergent type |
| Screw diameter (mm) |
65 |
115 |
120 |
150 |
200 |
250 |
| Length-diameter ratio of screw(L/D) |
4 |
4.8 |
4.6 |
4.43 |
4.35 |
4.5 |
| Compression ratio |
1.3 |
1.34 |
| Rotating speed pf screw(r/min) |
5.2-52 |
5.4-54 |
5.6-55.6 |
20-26 |
22.4-67.2 |
19.7-59.1 |
| Motor power(KW) |
Electromagnetic
speed 7.5KW |
Electromagnetic
speed 22KW |
Electromagnetic
speed 22KW |
55KW/8.3-55KWFrequency control 55KW |
Frequency control 75KW/Motor 25-75Motor commutator |
Frequency control 100KW/Motor 33.3-100Motor commutator |
| Production capacity(kg/h) |
50-80 |
100-420 |
100-450 |
700-1200 |
1500-2200 |
2000-3200 |
| Steam pressure (Mpa) |
0.2-0.3 |
0.4-0.6 |
0.2-0.4 |
0.6 |
0.6-0.8 |
0.6-0.8 |
| Cooling water pressure (Mpa) |
0.2-0.3 |
0.2-0.3 |
0.2-0.4 |
0.2-0.3 |
0.2-0.3 |
0.2-0.3 |
| Overall Dimension: Length× Width× Height(mm) |
1750× 550× 1100 |
2390× 760× 1450 |
2427× 750× 1330 |
3411× 814× 1470 |
4564× 1800× 1750 |
4950× 1150× 1483 |
Our Service:
1. Our engineer team can design customized machines for you and send the drawings for confirm.
2. The wires' connection from control box to operation box is finished before delivery. The user only needs to connect the outside wire to the controlling box.
3. Each machine is tested running with load at our factory before delivery to guarantee each parts working well.
4. Foundation drawings, detailed machine assembly drawings & parts drawing, user guide and maintenance manual will be supplied before the delivery.
5. Custom clear documents required in destination port, such as B/L, commercial invoice, packing list, insurance policy, C/O will be supplied once upon the delivery.
6. Oversea technical support can be offered as per request.
Our Package & Delivery:
FAQ:
1. Delivery time of the rubber machines?
Normally it needs about 25 days to 3 months according to the ordered machines' size and quantity.
2. What does your factory do regarding quality control?
We have the most professional engineer team to design the correct machines at the beginning, equip with the most advanced processing device to process the machine parts during the production period and finally arrange the most experienced assembly workers to assemble and check the final machines to 100% guarantee the superior quality and stable performance of each machine.
3. How long is your machines' warranty period?
The warranty period for our machines is one year from the day of normal working at the user plant.
4. Are you able to give installation and commissioning overseas? How long time will it take?
Yes, we can supply overseas service and technical support at the user plant with the charge of the required cost.
Small machines normally takes within 1~3 days.
Large machines normally takes about 30 days.
5. How can we go to your side for a factory visit?
We are located in Qingdao City, Shandong province, China. The nearest airport is Qingdao liuting airport.
Please advise us your time schedule in advance for us to pick up you at the airport.
Audited Supplier 
){kind=link}